Filter
Top Products
63
MIDI Implementation
Program Change
* Specifically when Standard Mode and Patch Mode are selected.
Channel Pressure
* Does not transmit while in System Exclusive Mode.
Pitch Bend Change
* Does not transmit while in System Exclusive Mode.
System Realtime Message
Start
* Does not transmit while in System Exclusive Mode.
Continue
* Does not transmit while in System Exclusive Mode.
Stop
* Does not transmit while in System Exclusive Mode.
Active Sensing
* During the normal operation, transmits at approx. 200 msec intervals.
* When message intervals are being monitored at the input section, the
output of Active Sensing messages will cease for a certain period of time
if the input interval exceeds 400 msec.
System Exclusive Message
For a detailed explanation, see
“Roland System Exclusive
Messages”
(p. 59) and
“3. Exclusive Communications”
(p. 64).
MIDI Machine Control (MMC)
* FC-300 can set the following MMC commands.
* Does not transmit while in System Exclusive Mode.
Status
Second
CnH
ppH
n = MIDI Channel Number
0H-FH (ch.1-ch.16)
pp = Program Number
00H-7FH (prog.1-prog.128)
Status
Second
DnH
vvH
n = MIDI Channel Number
0H - FH (ch.1-ch.16)
vv = Channel Pressure
00H-7FH (0-127)
Status
Second Third
EnH
llH mmH
n = MIDI Channel Number
0H - FH (ch.1-ch.16)
mm, ll = Pitch Bend
00 00H - 40 00H - 7F 7FH
(-8192 - 0 - +8192)
Status
FAH
Status
FBH
Status
FCH
Status
FEH
Status
Data Status
F0H
iiH, ddH, ....., eeH F7H
F0H
System Exclusive Status
ii = ID Number
41H (65)
dd, ..., ee = data
00H-7FH (0-127)
F7H
EOX (End of System Exclusive)
Status
Data Status
F0H
7FH, 7FH, 06H, com F7H
Byte
Description
F0H
System Exclusive Status
7FH ID Number (Universal Realtime Message)
7FH Device ID (Broadcast)
06H Sub-ID#1 (Machine Control Command)
com Sub-ID#2 (MMC Command)
F7H EOX (End of System Exclusive)
com
01H
STOP
02H PLAY
03H DEFERRED PLAY
04H FAST FORWARD
05H REWIND
06H RECORD STROBE
07H RECORD EXIT
08H RECORD PAUSE
09H PAUSE
FC-300_e1.book 63 ページ ２００７年４月２４日 火曜日 午前１０時１０分