Filter
Top Products
24
Performing with the Keyboard
When changing the tone assigned to a zone in Dual or Split mode, use [LOWER
SELECT] to specify the zone with the tone you want to change.
fig.01-14
1
If you want to select UPPER, press [LOWER SELECT] until the indicator is off.
When you want to select LOWER, press [LOWER SELECT] until the indicator
is green.
fig.01-15
The TONE SELECT button indicators are red when the UPPER zone is selected and
green when the LOWER zone is selected. In either zone, if tones from the same
category are selected, the button's indicator lights in orange.
2
Select the tone category with a TONE SELECT button, then select the tone
with [INC] or [DEC].
fig.01-16
The RD-300SX features two parts you can freely control using the instrument’s
buttons and keys; these two parts are called the UPPER zone and LOWER zone.
You can adjust the volume for each zone using the ZONE LEVEL sliders.
Changing the Tone for a Zone
Adjust the Volume Level for Individual Zones (ZONE LEVEL sliders)
2
1
2
[LOWER SELECT] is disabled
when [DUAL] or [SPLIT] is
switched off.
When selecting the UPPER zone When selecting the LOWER zone
RD-300SX_e.book 24 ページ ２００５年４月２０日 水曜日 午後３時４０分