Filter
Top Products
42
Settings for Each Function ([EDIT])
Adjusts the pitch of the tone’s sound up or down in 1-cent steps
(+/-50 cents).
One cent is 1/100th of a semitone.
This sets the amount of pitch change that will occur when you move
the Pitch Bend lever
in semitone increments
(+/-2 octaves).
1.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
2.
Press [INC] or [DEC] to select “U-L,” then press [ENTER].
fig.disp.U-L
3.
Referring to the following, press the TONE SELECT button
to which the parameter you want to change is assigned.
The parameter name appears in the display while the button is
held down. When the button is released, the value for the
parameter is shown in the display.
When setting the LOWER zone, set [LOWER SELECT] to ON.
Only the indicators of buttons to which a parameter is assigned
blink.
4.
Press [INC] or [DEC] to set the value.
5.
Press [EDIT] to turn off the indicator and quit editing.
You can return to Step 2 by pressing [EXIT].
Changing the Pitch (Fine Tune)
Value
-50 – 50 (cent)
Changing the Bend Range
(Bend Range)
Value
0–24
Making the Settings for
Each Zone Individually
(Zone Parameter)
How to Make Settings
TONE
SELECT
button
Indication
Parameter
PIANO
Key Transpose
E.PIANO Pan
ORGAN Damper Pedal Switch
STRINGS/
PAD
Control Pedal Switch
GUITAR/
BASS
Bender Switch
BRASS/
WINDS
Modulation Switch
VOICE/
SYNTH
— —
RHY/GM2
— —
RD-300SX_e.book 42 ページ ２００５年４月２０日 水曜日 午後３時４０分