Filter
Top Products
28
Performing with the Keyboard
In addition to reverb (p. 27), you can apply a variety of changes to the RD-300SX’s
sounds. These are referred to as “multi effects.” With the RD-300SX, you can select
from 78 different effect types.
With the factory default settings, effects have been preselected for each tone.
fig.01-23
1
Press [MULTI EFFECTS], getting its indicator to light.
Try fingering the keyboard.
The effect is applied to the currently selected tone.
2
To remove the effect, press [MULTI EFFECTS] once more, extinguishing the
indicator.
You can change the levels of depth for the effect.
The content and range vary according to the MFX type. For more detailed
information, refer to
“Effects List”
(p. 55).
1
Hold down [MULTI EFFECTS] and press [INC] or [DEC].
The depth for the effect being applied to the currently selected tone appears in the
display.
The next time you choose the same tone, the effect with the depth you’ve selected
here is applied.
Adding a Variety Effects to the Sound ([MULTI EFFECTS])
Changing the Depth of Effect
Effects may not be applied
with some of sounds.
1, 2
You can specify which zone is
to have priority when the
effects assigned to the Upper
zone and the Lower zone differ.
Refer to
“Setting the Zone to
which Multi Effects are
Added (MFX Zone)”
(p. 40).
You can change the effect type.
Refer to “Changing the Multi-
effects Type” (p. 29).
RD-300SX_e.book 28 ページ ２００５年４月２０日 水曜日 午後３時４０分