Filter
Top Products
40
Settings for Each Function ([EDIT])
1.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
2.
Press [INC] or [DEC] to select “Common,” then press
[ENTER].
fig.disp.Con
3.
Referring to the following, press the TONE SELECT button
to which the parameter you want to change is assigned.
The parameter name appears in the display while the button is
held down. When the button is released, the value for the
parameter is shown in the display.
Only the indicators of buttons to which a parameter is assigned
blink.
4.
Press [INC] or [DEC] to set the value.
5.
Press [EDIT] to turn off the indicator and quit editing.
You can return to Step 2 by pressing [EXIT].
This specifies which zone is to have priority when the effects
assigned to the Upper Tone and Lower Tone differ in Split mode or
Dual mode (p. 20).
* If same effects are assigned to the Upper Tone and Lower Tone, the
same effects are added to both of Tones.
This sets the function of the pedal switch or expression pedal (such
as the optional EV-5) connected to the CONTROL jack on the rear
panel.
This function cannot be used when Setup Pedal Shift is
switched to ON (p. 39) .
Setup-Related Settings
(Common)
How to Make Settings
TONE
SELECT
button
Indication
Parameter
PIANO MFX Zone (p. 40)
E.PIANO Control Pedal Function (p. 40)
ORGAN — —
STRINGS/
PAD
— —
GUITAR/
BASS
— —
BRASS/
WINDS
— —
VOICE/
SYNTH
— —
RHY/GM2
— —
Setting the Zone to which Multi
Effects are Added (MFX Zone)
Indication
Description
UPPER
LOWER
Changing the Pedal Function
(Control Pedal Function)
Indication Description
Soft (Default)
Sostenuto
Expression
Rhythm Start/Stop
Multi-effects ON/OFF
Modulation
RD-300SX_e.book 40 ページ ２００５年４月２０日 水曜日 午後３時４０分