Filter
Top Products
57
Effects List
47
3TAP PAN
DELAY
Produces three delay sounds; center, left and
right.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
48
4TAP PAN
DELAY
This effect has four delays. Balance:
Volume balance between the direct sound and the delay sound
(0–100)
49
MULTI TAP
DELAY
This effect provides four delays with feed-
back.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
50
REVERSE
DELAY
This is a reverse delay that adds a reversed
and delayed sound to the input sound.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
51
SHUFFLE
DELAY
Adds a shuffle to the delay sound, giving the
sound a bouncy delay effect with a swing
feel.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
52
3D DELAY
This applies a 3D effect to the delay sound.
The delay sound will be positioned 90 de-
grees left and 90 degrees right.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
53
TIME CONTROL
DELAY
A stereo delay in which the delay time can be
varied smoothly.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
54
LONG TIME
CONTROL
DELAY
A delay in which the delay time can be varied
smoothly, and allowing an extended delay to
be produced.
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
55
TAPE ECHO
A virtual tape echo that produces a realistic
tape delay sound.
Echo Level:
Volume of the echo sound (0–127)
56
LOFI NOISE
In addition to a Lo-Fi effect, this adds various
types of noise such as white noise and disc
noise.
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
57
LOFI
COMPRSSOR
This is an effect that intentionally degrades
the sound quality for creative purposes.
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
58
LOFI RADIO In addition to a Lo-Fi effect, this effect also
generates radio noise.
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
59
TELEPHONE This applies a telephone sound. Balance:
Volume balance between the direct sound and the effect sound
(0–100)
60
PHONOGRAPH
Simulates a sound recorded on an analog
record and played back on a record player.
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
61
PITCH
SHIFTER
A stereo pitch shifter. Fine:
Adjusts the pitch of the pitch shifted sound (0–100)
62
2VOICE PITCH
SHIFTER
Shifts the pitch of the original sound. This 2-
voice pitch shifter has two pitch shifters, and
can add two pitch shifted sounds to the orig-
inal sound.
Balance:
Volume balance between the Pitch Shift 1 and Pitch Shift 2
sounds (0–100)
63
STEP PITCH
SHIFTER
This pitch shifter changes the shift volume of
the pitch shift sound in a stepped fashion.
Rate:
Rate of modulation (0–21)
64
REVERB
Adds reverberation to the sound, simulating
an acoustic space.
Time:
Time length of reverberation (0–127)
65
GATED
REVERB
This is a special type of reverb in which the
reverberant sound is cut off before its natural
length.
Balance:
Volume balance between the direct sound and the reverb
sound (0–100)
66
OVERDRIVE
→
CHORUS
This effect connects an overdrive and a cho-
rus in series.
Chorus Balance:
Adjusts the volume balance between the sound that is sent
through the chorus and the sound that is not sent through the
chorus (0–100)
67
OVERDRIVE
→
FLANGER
This effect connects an overdrive and a
flanger in series.
Flanger Balance:
Adjusts the volume balance between the sound that is sent
through the flanger and the sound that is not sent through the
flanger (0–100)
Indicated
number
Effect name
Overview Effect parameter name when changed by holding down
[MULTI EFFECTS] and pressing [INC] or [DEC] (p. 29):
An overview thereof (Value)
RD-300SX_e.book 57 ページ ２００５年４月２０日 水曜日 午後３時４０分