Filter
Top Products
20
Before You Play
You can use headphones to enjoy the RP201 without disturbing
those around you, such as at night.
Since the RP201 has two headphone jacks, two people can also use
headphones simultaneously.
If you’re using only one set of headphones, you may connect them
to either of the two headphone jacks.
fig.Headphones.eps
1.
Plug the headphones into the headphones jack located
at the left of the RP201’s bottom panel.
If headphones are connected, no sound will be output from the
RP201’s speakers.
2.
Use the RP201’s [VOLUME] knob (p. 18) to adjust the
headphone volume.
Cautions when Using Headphones
• To prevent damage to the cord’s internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
• Your headphones may be damaged if the volume of a device is
already turned up when you plug them in. Minimize the volume
before you plug in the headphones.
• Excessive input will not only damage your hearing, but may also
strain the headphones. Please enjoy music at an appropriate
volume.
• Use headphones that have a stereo 1/4” phone plug.
Whenever you are not using the headphones, you can hang them
on the headphone hook of the RP201.
Attaching the Headphone Hook
1.
Press and twist the headphone hook included with the
RP201 into the hole in the bottom left of the RP201 (refer
to the figure below).
2.
Turn the headphone hook wing nut to secure the
headphone hook.
fig.Bottom-hook.eps
Do not hang anything other than headphones on the
headphone hook. Doing so may damage the instrument or the
hook.
Listening through Headphones
Headphones
Using the Headphone Hook
Headphone hook
Wing nut
RP-201_e.book 20 ページ ２００９年１１月２０日 金曜日 午後２時３分