37
Various Settings
When you press the damper pedal during Dual play or Split play, the
damper pedal effect is normally applied to both tones, but you can
also select the tone to which the effect is to be applied.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [Strings] button and use the [–] or [+]
button to select “dPr.”
3.
Release the [Strings] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
You can use the Memory Backup function to store this setting
in internal memory (p. 44).
When you turn on the power, the left pedal functions as the soft
pedal, and the center pedal functions as the sostenuto pedal (p. 19).
You can change the function of the pedal to a variety of other
operations.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Hold down the [Strings] button and use the [–] [+]
buttons to select the pedal whose function you want to
change.
3.
Release the [Strings] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
“Layer” and “Octave” cannot be specified simultaneously for
the center and left pedals.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
Pedal Settings
Changing How the Damper Pedal is Applied
(Damper Pedal Part)
Setting
Explanation
All enabled
Applied only to Tone 1 (in dual play)/Right-hand Tone
(in split play)
Applied only to Tone 2 (in dual play)/Left-hand Tone (in
split play)
Changing How the Pedals Work
(Center/Left Pedal Function)
Setting
Explanation
Center Pedal
Left Pedal
Setting
Explanation
Sostenuto
Sets function to sostenuto pedal.
(Selectable only for the center pedal)
Soft
Sets function to soft pedal.
(Selectable only for the left pedal)
Play/Stop
The pedal will have the same function as the
[
] button.
Layer
Pressing the pedal will layer on Tone 2, used for Dual
play.
* The Layer function can be applied only when using
Dual play.
Octave
Pressing the pedal will layer on a sound one octave
higher.
* The Octave function cannot be applied while using
Twin Piano, Dual play, or Split play.
RP-201_e.book 37 ページ 2009年11月20日 金曜日 午後2時3分