Filter
Top Products
41
Various Settings
Here you can make various MIDI-related settings for the RP201.
For more about MIDI, refer to “Connecting to MIDI Devices” (p. 47).
You can connect the RP201’s MIDI In connector to the MIDI OUT
connector on your computer’s MIDI interface and play back
separately sold CD-ROMs created for the VIMA (VIMA TUNES). This
requires the “VIMA TUNES PLAYER” software, which is available free
of charge on Roland’s web site:
http://www.roland.com/products/en/
* Please visit the RP201 product page from Alphabetical index, then
open the “Download” page.
Songs on VIMA CD-ROMs (VIMA TUNES) are programmed with
“recommended tones” suitable for each song.
When you select a song from a VIMA CD-ROM (VIMA TUNES),
recommended tones will be assigned to the RP201’s [E. Piano],
[Strings], and [Others] tone buttons, and these three tone buttons
will blink.
When you press a flashing Tone button, the recommended tone is
then selected, enabling you to perform the selected song using a
tone matched to that song as it plays back.
You can set the RP201 so that the recommended tones are
automatically assigned or not assigned.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Hold down the [Others] button and use the
[–] [+] buttons to make the display indicate “rtn.”
3.
Release the [Others] button to see the current setting.
4.
Use the [-] [+] buttons to change the setting.
This is set to “On” at the factory.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
When you have a MIDI sequencer connected, set this parameter to
Local Off.
Since the Thru function of your sequencer will normally be turned
on, notes played on the keyboard or played back by the recorder
will be transmitted to the sound generator by the two routes (1) and
(2) shown in the illustration, causing notes to be sounded in
duplicate or to be cut off unnaturally. To prevent this, the setting
called “Local Off” is used to disconnect the route in (1).
fig.LocalControl.eps
Local On:
The keyboard and recorder are connected to the internal sound
generator.
fig.LocalOn.eps
Local Off:
The keyboard and recorder are not connected to the internal sound
generator. No sound will be produced by the keyboard when it is
played.
fig.LocalOff.eps
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [Others] button and use the [–] or [+]
button to select “L.Ct.”
3.
Release the [Others] button to see the current setting.
MIDI Settings
Switching VIMA TUNES Recommended
Tones (Recommended Tone)
Setting
Explanation
When you select a song from a VIMA CD-ROM (VIMA
TUNES), recommended tones will automatically be
assigned to the RP201’s [E. Piano], [Strings] and
[Others] tone buttons.
The recommended tones are not used, and only the
RP201’s internal tones can be selected.
Preventing Double Notes when Working
with a Sequencer (Local Control)
(1)
MIDI
MIDI
MIDI
MIDI
(2)
IN
IN
OUT
OUT
Sequencer
Memory
Sound
Generator
Each note played is sounded twice
Soft Thru On
Local On
Local On
Sound is emitted
Sound Generator
Local Off
No sound produced
Sound Generator
RP-201_e.book 41 ページ ２００９年１１月２０日 金曜日 午後２時３分