Roland RP201 Electronic Keyboard User Manual


 
33
Saving Your Performance
5.
Press the [ ] button.
The selected song will be deleted.
ffig.d-dEL.eps
Never turn off the power while “dEL” is blinking in the display.
If you delete all songs saved in internal memory, the display
will indicate “non.”
6.
Press the [Song] or [Metronome] button to leave
Function mode.
Here’s how you can completely erase all songs that were saved in
internal memory.
The procedure described here erases all songs that have been
saved in memory. The erased data cannot be recovered, so we
recommend that you check the contents of memory before
you proceed.
fig.SaveButtonz.eps
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc,” and you’ll be in Function mode.
fig.d-Fnc.eps
2.
Hold down the [Transpose] button and use the [–] [+]
buttons to make the display indicate “dEL.”
If the internal song memory is empty, the following steps
cannot be performed.
When you take your finger off the button, a list of all songs stored in
the internal memory will appear and the [
] button will flash.
3.
Press the [–] button a number of times until the display
reads “ALL.”
4.
Press the [
] button.
The display will indicate “Sur,” and the [
] button and [ ]
button will flash.
fig.d-Sur.eps
If you decide not to delete all songs, press the [
] button.
5.
Press the [
] button.
fig.d-dEL.eps
The entire contents of the internal memory will be erased and the
display will show the “non” message.
Never turn off the power while “dEL” is flashing in the display.
6.
Press the [Song] or [Metronome] button to leave
Function mode.
Deleting All Songs
RP-201_e.book 33 ページ 2009年11月20日 金曜日 午後2時3分