Filter
Top Products
40
Various Settings
You can change the volume of the damper pedal resonance.
On an acoustic piano, depressing the damper pedal makes the
notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal on the
RP201 recreates this resonance (Damper Resonance) when
depressed.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [E. Piano] button and use the [–] or [+]
button to select “rES.”
3.
Release the [E. Piano] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
You can use the Memory Backup function to store this setting
in internal memory (p. 44).
When you play the keys on an acoustic piano, the strings that are
already playing resonate as well. The function that reproduces this
effect is called “String Resonance.”
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [E. Piano] button and use the [–] or [+]
button to select “rSt.”
3.
Release the [E. Piano] button to see the current setting.
4.
Use the [-] [+] buttons to change the setting.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
You can use the Memory Backup function to store this setting
in internal memory (p. 44).
You can play the “key off” sound (the subtle sound produced when
the keys are released) obtained when playing an acoustic piano.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [E. Piano] button and use the [–] or [+]
button to select “rOF.”
3.
Release the [E. Piano] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
You can use the Memory Backup function to store this setting
in internal memory (p. 44).
Settings for Piano Sounds
Producing Sympathetic Resonance When You
Press the Damper Pedal (Damper Resonance)
Setting
Explanation
OFF, 1–10
The resonance volume decreases as the value is
lowered, while raising the value increases the
volume of the Damper Resonance.
The Damper Resonance function is not active
when the value is set to “OFF.”
Producing the Resonance of the Strings
When the Keys Are Played (String Resonance)
Setting Explanation
OFF, 1–10
The resonance level decreases as the value is
decreased, while increasing the value increases
the amount of resonance.
The String Resonance function is not active when
the value is set to “OFF.”
Playing Sounds When the Keys Are Released
(Key Off Resonance)
Setting Explanation
OFF, 1–10
The volume of the Key Off sound decreases as the
value is lowered, while raising the value increases the
volume of the Key Off sound.
The Key Off Resonance function is not active when
the value is set to “OFF.”
RP-201_e.book 40 ページ ２００９年１１月２０日 金曜日 午後２時３分