Filter
Top Products
42
Various Settings
4.
Use the [-] [+] buttons to change the setting.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
This setting specifies the MIDI channel on which the RP201 will
transmit.
MIDI uses sixteen “MIDI channels,” which are numbered 1 through
16. By connecting MIDI devices and specifying the appropriate MIDI
channel for each device, you can play or select sounds on those
devices.
The RP201 will receive all sixteen channels (1–16).
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [Others] button and use the [–] or [+]
button to select “Ch.”
3.
Release the [Others] button to see the current setting.
4.
Use the [-] [+] buttons to change the setting.
When set to “Off,” none of the data describing what you play
on the keyboard will be transmitted.
For details on connecting MIDI devices, refer to “Connecting to
MIDI Devices” (p. 47).
5.
Press the [Song] or [Metronome] button to leave
Function mode.
When Composer MIDI Out is “On,” you can send performance data
recorded with the RP201 to a connected MIDI device or computer.
1.
Hold down the [Song] button and press the [Metronome]
button
The display will indicate “Fnc” and you’ll be in Function mode.
2.
Press and hold the [Others] button and use the [–] or [+]
button to select “Out.”
3.
Release the [Others] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
Setting
Explanation
Local Control is set to On.
The keyboard and recorder are connected to the
internal sound generator.
Local Control is set to Off.
The keyboard and recorder are not connected to the
internal sound generator. Playing the keyboard or
playing back a song will not produce sound.
MIDI Transmit Channel Settings
(MIDI Transmit Channel)
Settings (Channel)
OFF, 1–16
Sending Recorded Data to a MIDI Device
(Composer MIDI Out)
Setting Explanation
Performance data is transmitted.
Performance data is not
transmitted.
RP-201_e.book 42 ページ ２００９年１１月２０日 金曜日 午後２時３分