Filter
Top Products
132
Chapter 8 Parameter Guide MIXER
OUTPUT
This setting determines the signal routing and level to the VB-99’s
outputs.
* The parameters enabled (MAIN OUT, MAIN LEVEL, SUB OUT,
SUB LEVEL, D OUT, D OUT LEVEL) change according to the
settings in
“OUTPUT MODE”
(p. 151) in the SYSTEM screen.
When disabled, the value < > is given.
Parameter/
Range
Explanation
MAIN OUT
This switches the signals output from the MAIN OUT.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
BASS DIRECT This outputs only the bass direct sound
(normal pickup sound).
MAIN LEVEL
0–200
Adjusts the output volume to the MAIN
OUT.
SUB OUT
This switches the signals output from the SUB OUT.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
BASS DIRECT This outputs only the bass direct sound
(normal pickup sound).
SUB LEVEL
0–200 Adjusts the output volume to the SUB OUT.
Parameter/
Range
Explanation
D OUT (Digital Output)
This switches the signals output from the DIGITAL OUT.
COSM BASS A
This outputs the sounds from COSM BASS
A.
COSM BASS B This outputs the sounds from COSM BASS
B.
NORMAL PU This outputs the sounds from the normal
pickup.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
MAIN OUT This outputs the same signals as those from
MAIN OUT.
SUB OUT This outputs the same signals as those from
SUB OUT.
D OUT LEVEL (Digital Output Level)
0–200
Adjusts the output volume to theDIGITAL
OUT.
VB-99_e.book 132 ページ ２００８年８月１８日 月曜日 午後１時１０分