Roland VB-99 Music Mixer User Manual


 
146
Chapter 8 Parameter Guide SYSTEM
*1 Setting available when GK PU TYPE is set to PIEZO G, PIEZO
G or PIEZO R.
CTL (Control)
CONTROL ASSIGN
Parameter/
Range
Explanation
GK PU POS (GK Pickup Position)
This sets the divided pickup’s position.
4STR-1 This is the position on a 4-string bass.
4STR-2
4STR-3
5STR Lo1 This is the position on a 5-string bass
(Low B–G).
5STR Lo2
5STR Hi1 This is the position on a 5-string bass
(E–Hi C).
5STR Hi2
6STR This is the position on a 6-string bass.
GK PU PHASE (GK Pickup Phase)
This sets the phase for the divided pickup and normal pickup.
Set this to NORMAL, and if the low-frequency range is cut, set this
to INVERS.
Mixing the divided pickup sound and normal pickup sound
(p. 30) makes it easier to determine the phase.
NORMAL The phase is left unchanged.
INVERS The phase is inverted.
GK PU DIRECTION (GK Pickup Direction)
This sets the direction for the divided pickup’s installation.
NORMAL The cable exits the pickup in the direction of
the bass’s bridge.
REVRSE The cable exits the pickup in the direction of
the bass’s neck.
S1, S2 POS (S1, S2 Position)
This exchanges the function for the GK-3B’s or GK-2B’s DOWN/S1,
UP/S2 switches.
NORMAL The switches are left unchanged.
REVRSE The DOWN/S1 switch and UP/S2 switch
are exchanged.
PICKUP
BRIDGE HiC, 1–4th, LowB
0.0–50.0mm
This sets the distance of the gap between
each divided pickup and the bridge.
The setting is disregarded when the GK PU
TYPE is set to piezo type parameter.
SENS HiC, 1–4th, LowB
0–100
This sets the input sensitivity for each string.
Parameter/
Range
Explanation
Controller
You can freely assign functions to the VB-99’s and FC-300’s control-
lers.
GK VOL GK-3B GK volume knob
GK S1, S2 GK-3B DOWN/S1, UP/S2 switch
CTL1 Control button1
CTL2 Control button2
EXP PEDAL Expression pedal connected to the EXP
PEDAL jack
CTL3 Footswitch connected to the CTL3,4 jack
(jack tip)
CTL4 Footswitch connected to the CTL3,4 jack
(jack ring)
FC-300 EXP1 FC-300 expression pedal1
FC-300 EXP SW1 FC-300 expression pedal switch1
FC-300 EXP2 FC-300 expression pedal2
FC-300 EXP SW2 FC-300 expression pedal switch2
FC-300 CTL1 FC-300 control pedal1
FC-300 CTL2 FC-300 control pedal2
FC-300 EXP3/CTL3 FC-300 external expression pedal3/external
footswitch3
FC-300 CTL4 FC-300 external footswitch4
FC-300 EXP4/CTL5 FC-300 external expression pedal4/external
footswitch5
FC-300 CTL6 FC-300 external footswitch6
FC-300 EXP5/CTL7 FC-300 external expression pedal5/external
footswitch7
FC-300 CTL8 FC-300 external footswitch8
VB-99_e.book 146 ページ 2008年8月18日 月曜日 午後1時10分