Filter
Top Products
16
Names and Functions of Controls on Screen
d MUTING indicator
The indicator for the muted fader lights up red.
e Remote fader level indication
Shows the level of the remote fader.
PARALLEL/PROJECTOR CONTROL screen
The PARALLEL/PROJECTOR CONTROL screen allows
you to make settings on the REMOTE PARALLEL
connector of the mixer and projector control.
A PARALLEL setting section
a PARALLEL INPUT indicators
Show the status of each input pin of the REMOTE
PARALLEL connector.
When input voltage is high: Turns off.
When input voltage is low: Lights up green.
b INPUT function selection section
Left-click and select the function from the pull-down
menu.
The selectable functions are as follows:
INPUT Connectable
device
Function
NONE - None
AV/RGB
SELECT
OFF, A-E Switch
(momentary
type)
When turned on, selects AV/RGB
SELECT setting (OFF or A-E).
MASTER
VOLUME
MUTING Switch (latch
type)
When turned on, mutes the master
volume. Turn off to cancel muting.
UP Switch
(momentary
type)
While turned on, keeps turning up
the master volume.
DOWN Switch (latch
type)
While turned on, keeps turning
down the master volume.
REMOTE
FADER 1-6
MUTING Switch (latch
type)
When turned on, mutes the
remote fader. Turn off to cancel
muting.
LEVEL Volume Adjusts the remote fader volume.