Filter
Top Products
6
Names and Functions of Controls on Screen
D The index of the selected scene number is displayed.
E Click the Open button.
Save: Saves the new data by overwriting the existing data.
Save as: Saves the data under a different name.
Exit: Exits the SRP-X500P Manager.
b Communication menu
Activates/deactivates the communication between the
SRP-X500P Manager and the mixer. Also specifies the
port number for RS-232C communication.
Connect: Activates communication. Cannot be selected
when the communication between the SRP-X500P
Manager and the mixer is already activated.
Disconnect: Deactivates communication. Cannot be
selected when the communication between the SRP-
X500P Manager and the mixer is already deactivated.
Port select: Specifies the port number for RS-232C
communication to be used for SRP-X500P Manager
operation.
c Options menu
Factory preset: Resets all parameters to the default
settings.
Password setting: You can set a password.
A Enter a password.
B For confirmation, enter the same password again.
C Click “OK”.
Note
If you enter the wrong password, you cannot start the SRP-
X500P Manager. Be sure to take a note of the password.
If you forget the password, uninstall the software and then
reinstall it from the supplied CD-ROM.
d Help menu
About: The version of the software appears.
B Screen selection tabs
Click to select the setup screen for each parameter.
C CONNECTION indicator
Lights up green when the communication between the
SRP-X500P Manager and the mixer is activated.
BLOCK screen
The BLOCK screen shows the internal block diagram of
the mixer. You can click the button to turn each function
on or off while monitoring overall settings on this screen.