Filter
Top Products
Starting out with your DP-01
TASCAM DP-01 Owner’s Manual 19
Connecting your DP-01 to other equipment
External stereo input The DP01 has two 1/4" mono unbalanced
jacks on the rear panel marked
STEREO MIX.
These can be used to connect an external stereo submixer, synthesizer,
drum machine, CD player, etc.
This stereo signal is routed to the analog
LINE OUTPUT jacks. They cannot
be recorded on the DP01, nor can you adjust the signal level using the DP
01.
You can connect a
digital recorder
(CD, MD) using the digital connec-
tion, while using the
LINE OUTPUT
jacks for monitoring.
Digital output Use a standard optical digital cable to connect this (rear
panel, close to the power switch) to a suitable digital stereo input of a mon
itoring system, or stereo recorder.
The signals sent from this are the same as those sent from the
LINE OUTPUT
jacks (although the
STEREO MIX signals are not output through the digital
output).
MIDI output Use this (rear panel) to connect a sequencer, drum machine,
etc. which can be started, stopped and synchronized with the DP01. See
“Working with MIDI” on page 38 for details.
DP-01_OM_E.book 19 ページ ２００５年６月１３日 月曜日 午後７時１４分