Filter
Top Products
DP-01FX/CD Appendix
TASCAM DP-01 Owner’s Manual 73
Audio CD Menu
3 Select MASTER WRITE from the AUDIO CD menu.
To cancel selection
of a song, hold the
SHIFT
key and press the
INSERT
key.
4 A list of songs that have master tracks is displayed. Move the arrow
using the
and keys to select songs to write to the CD, and press
the
INSERT key to add them to the list.
A tick mark "✔" is displayed to the left of songs to indicate that the
song is selected.
5 When you have decided on the songs to write, press the ENTER key.
In this screen, you can set the order in which the master stereo tracks
are to be written to the CD.
Select the song whose order is to be changed using the
and
keys, and press the ENTER key.
The arrow to the side of the song name changes to an up/down arrow.
You can now change the order of the song using the
DATA dial.
When you have changed the song order, press
EXIT key.
The up/down arrow display returns to the right arrow display.
(When there are two or more songs whose order is to be changed,
repeat this operation.)
6 In the SONG ORDER screen, press the cursor key. The screen for
setting the gap between songs is displayed.
Move the arrow using the
and keys to select, and set the length
of the gap to be made after each song by the
DATA dial.
You can set any gap within the range 0.0 to 9.9 seconds in 0.1 second
increments.
To end setting of the gap and write to the CD, press the
ENTER key.
T
o return to the
SONG ORDER
screen, press the
cursor key.
7 The following write confirmation screen is displayed.
Press the
ENTER key again to begin the burning process.
DP-01_OM_E.book 73 ページ ２００５年６月１３日 月曜日 午後７時１４分