Tascam D00871320A Recording Equipment User Manual


 
Reverb
68 TASCAM DP-01 Owner’s Manual
DP-01FX Appendix
Reverb
“Reverb” is short for
“reverberation”—
the sound produced by many short
echoes off the walls of rooms, etc.
The reverb effect is available as an alternative to the external SEND/
RETURN loop with an external effect processor (see “Effect proces-
sor” on page 18). You cannot use both at the same time.
Turning the reverb on and off
Press and hold the SHIFT key and press the REVERB key to turn the
reverb on (the indicator lights) and off (the indicator is unlit).
Using the reverb
When the reverb is on, the mixer EFFECT SEND controls and the
EFFECT RETURN control affect the amount of signal sent to the inter-
nal reverb from the tracks, and returned from the internal reverb unit
to the stereo mix.
When the reverb is turned off, the mixer
EFFECT SEND controls and
the
EFFECT RETURN control affect the amount of signal sent to the
SEND jack from the tracks, and returned to the stereo mix via the
RETURN jacks.
Setting the reverb type
Bring up the reverb screen by pressing the REVERB key:
Turn the TYPE control to select one of the different “flavors” of reverb:
Hall, Room, Live or Studio. Each of these settings has a different quality
and character.
Setting the reverb time
With the reverb screen displayed, simply turn the PARAMETER control
to change the time the reverb sound takes to die away, from 0.1 sec-
onds to 5.0 seconds in 0.1 second steps.
DP-01_OM_E.book 68 ページ 2005年6月13日 月曜日 午後7時14分