Filter
Top Products
Working in bars & beats
38 TASCAM DP-01 Owner’s Manual
Advanced techniques
You can select MIDI channel, note/note on velocity of a regular click, and
note/note on velocity of an accent.
Scroll the list to set the following parameters:
Mode Select from RecOnly (only at recording) and Rec&Play (at recording
and playback).
Channel 10 is
defined as the
default drum channel for all General
MIDI devices.
MIDI Ch The MIDI channel on which the metronome signals are output.
AccNote The note played at the start of each bar. C3 is equivalent to
MIDI note 60.
AccVelo The velocity (which typically affects the volume) of the note at
the start of each bar.
NrmNote The note played at each beat, except at the start of each bar. C3
is equivalent to MIDI note 60.
NrmVelo The velocity (which typically affects the volume) of the note at
each beat, except the start of each bar.
When "OFF" is selected at "Output"
The metronome function is disabled, and no items other than Output are
displayed.
Working with MIDI
The DP-01 is equipped with a MIDI OUT jack. This can be used to
drive a sequencer, drum machine, etc., either synchronized to a time
base, or a MIDI clock (see below for an explanation of how this
works). MIDI OUT is also used to drive a MIDI instrument as a met-
ronome (see “Metronome” on page 37).
A MIDI instrument can be connected to the
A and B inputs, or mixed with
the recorded tracks from the analog outputs if it is fed into the
STEREO MIX
inputs.
MIDI Clock, etc.
You must set a
tempo and time sig-
nature on the DP-01 (“Tempo set-
ting” on page 36) to use this
feature.
The MIDI song control messages put out by the DP-01 from the
MIDI OUT port include tempo (MIDI Clock), bar and beat information
(Song Position Pointer), and Start/Stop/Continue messages. This
way of working is particularly suitable for synchronizing with bar/
beat-based MIDI devices such as drum machines and rhythm units.
1 Press MENU and scroll down to MIDI and press the key.
DP-01_OM_E.book 38 ページ ２００５年６月１３日 月曜日 午後７時１４分