Tascam D00871320A Recording Equipment User Manual


 
Starting out with your DP-01
TASCAM DP-01 Owner’s Manual 21
Managing your songs
Reverting to last version The REVERT action (which follows the SAVE
action in the
SONG menu) allows you to undo all changes since the last save.
When you select the REVERT action, the title of the song is shown. Press
ENTER to go back to the last saved version, or EXIT to keep the current
song as it is.
Loading a saved song
Of course, saving songs is no use unless you can load them again.
This is how you do it.
1 Press the MENU key, use the jog wheel to highlight the SONG menu
item, and press the
key.
2 Highlight the LOAD action, and press the key:
3 Use the jog wheel to move the cursor to the song to be loaded and
press
ENTER. If the symbol appears next to the song, then that song
is currently loaded.
The current song is saved, and the selected song is loaded.
Erasing a song
Erase a song only if
you are certain you
don’t need it any more
you can’t
undo this operation! However, you
can use a USB connection to back
up songs to a PC before you erase
them.
If your disk is getting full, or you really don’t need a song any more,
you can erase it.
1 From the SONG menu, select the ERASE action:
2 Highlight a song and press ENTER.
3 You are asked if you want to erase the song (Are you sure?).
Press
ENTER to erase the song, or EXIT to cancel the operation.
If you erase the current song, the first song in the list is automatically
loaded.
DP-01_OM_E.book 21 ページ 2005年6月13日 月曜日 午後7時14分