Filter
Top Products
53
Custom Style
Custom Style Alert & Error Displays
The following alert and error displays may appear in the corresponding situations.
■ Insufficient Memory To Store ..............................................................
This alert message will appear if there is not enough memory to per-
form a store operation.
In this case it will be necessary to either delete a style you don’t need
or simplify the style you are currently recording. Press CANCEL to re-
turn to CUSTOM STYLE page 1, at which point you can simplify the
current style (by clearing a part, etc.), or DELETE to go to the “Delete
STYLE ?” display:
Use the MEMORY No. ▲ and ▼ buttons to select the number of the
style you want to delete, then press OK to delete the style, or CANCEL
to abort.
■ Memory Full During Recording .........................................................
This alert message will appear if the memory becomes full during
recording or editing.
Press OK to return to CUSTOM STYLE page 1 and simplify the style
by clearing a part, etc.
• The amount of memory being used for
the selected style is also shown on the
display (in approximate kilobytes) so
as to set up the approximate standard
which style to delete in relation to the
total 160 KB memory space.