Filter
Top Products
78
Song Recording
Punch-in/out Recording
“Punch-in/out recording” allows you to start recording from any “punch-in” point within a previously-
recorded track and stop recording at any “punch -out” point, leaving all recorded material up to the punch-
in point and following the punch-out point intact. The punch-in recording controls are accessed via the
RECORD [PUNCH IN/OUT] display (RECORD display page 3).
ZPlay the Song........................................................................................................
Play back the song in order to locate the point you want to punch-in
from.
CSelect a Track .......................................................................................................
Use the TRACK ▲ and ▼ LCD buttons or the data dial or [+]/[–]
buttons to the select the track to be recorded on. The voice used in the
selected track will be shown on the display.
• Only tracks which allow punch-in/out
recording will appear and can be se-
lected. The RHYTHM, ABC, HAR-
MONY, and unrecorded tracks cannot
be selected.
• The Punch-in/out recording function
cannot be used when no disk is in the
drive.
• [
f
FF] or [
r
REW] buttons cannot
be used while in the [PUNCH IN/OUT]
display.
XPause Before the Punch-in Point....................................................
Press the [o PAUSE] button to pause playback a bit before the point
at which you want to start recording. Leave a measure or more before the
punch-in point so you’ll be able to grasp the timing for the punch in.
REW FF PAUSE
SONG CONTROL
TAP SYNCHRO START/STOP
START/STOP