Filter
Top Products
75
Song Recording
Multi-track Recording & Playback
ZInsert a Formatted Disk, Engage the Record Mode &
Select a Song ........................................................................................................
The first three steps in the multi-track recording process are exactly
the same as those for quick recording: insert a formatted disk, press the
[RECORD] button to engage the record mode, and select a song number
— see steps 1, 2, and 3, above.
XSelect the TRACK RECORD Page ..................................................
Use the PAGE buttons to select the TRACK RECORD page
(RECORD display page 2). The status of each track is shown above the
TRACK LCD buttons. Tracks which are enabled for playback are indi-
cated by a box surrounding the track number, and tracks which are
record-enabled are indicated by a filled box and inverse number. Tracks
which do not contain data appear as dots.
CSet The Track Modes as Required .................................................
Use the TRACK < and > buttons to select a track (an underline cur-
sor appears under the selected track). The data dial and [+]/[–] buttons
can also be used to select tracks. Use the REC/PLAY/OFF LCD button
to record-enable, play-enable, or turn off (mute) the selected track. Only
tracks which contain data can be play-enabled. The track number box
disappears when the track is muted.