Filter
Top Products
83
Song Recording
Other Song Recording Functions
Track Mix
The TRACK MIX function combines the data from two specified tracks and places the result in a third
specified track. The TRACK MIX function is accessed via the RECORD [TRACK MIX] display
(RECORD display page 4).
• Only the data-containing tracks will
appear and can be selected for TRK A
and B. In addition “no track” (“- -”) can
also be selected for TRK B. — In this
case the result will be the copy of TRK
A to TRK C.
• The initial data and all data other than
note data is taken from that of track A.
ZSpecify the Tracks to be Mixed ..........................................................
Use the TRK A and TRK B LCD buttons — or the data dial or [+]/[–]
buttons once the TRK A or TRK B parameter has been selected — to
specify the tracks you want to mix. The initial voices used for the A and
B tracks are shown along with the track number.
XSpecify the Destination Track.............................................................
Use the TRK C LCD button — or the data dial or [+]/[–] buttons once
the TRK C parameter has been selected — to specify the track you want
the mixed data to be placed in. Any previous data in the destination track
(TRK C) will be erased.
CExecute the Track Mix Operation ....................................................
Press the MIX LCD button to begin execution of the track mix op-
eration. The “Are you sure?” confirmation prompt will appear. Press
YES to mix the specified tracks or NO to cancel the operation.
When this is done the MIX LCD button will change to UNDO, al-
lowing you to undo the track mix operation and return to the pre-mixed
data before selecting a different track or exiting from the Track Mix
mode.
Press the [EXIT] button, or the [RECORD] button so that its indica-
tor goes out to exit from the Track Mix function.
• A bar graph indicating the progress of
the track mix operation will appear
while the data is being processed.
• You can check if the results are as you
expected or not, by starting and stop-
ping playback by using the [START/
STOP] button before the UNDO opera-
tion.
• Track Mix, Track Delete, Track Quantize, Initial Edit, and Rename functions,
described below, cannot be used when no disk is in the disk drive.