Filter
Top Products
128
Copying, moving, or initializing a channel
LS9-16/32 Owner’s Manual
If desired, you can restore the parameters of any channel
to an initialized state. This operation can be performed on
any channel(s).
1
In the DISPLAY ACCESS section, press the
[CHANNEL JOB] key repeatedly to access
the CH CLEAR screen of the CHANNEL
JOB screens.
1 TARGET CHs field
In this field, select the channel(s) that you want to ini-
tialize.
B CLEAR TARGET button
This button clears the channels shown in the TARGET
CHs field.
C CLEAR button
Executes the initialization.
2
To select the channel(s) to be initialized,
press the corresponding [SEL] key to make
it light (multiple selections are allowed).
The corresponding channel(s) is/are highlighted in the
TARGET CHs field of the window.
If you want to de-select all channels, move the cursor
to the CLEAR TARGET button and press the
[ENTER] key.
3
To execute the Initialize operation, move the
cursor to the CLEAR button and press the
[ENTER] key.
The parameters of the selected channel(s) will be ini-
tialized. After initialization, the TARGET CHs field
will return to a state in which nothing is selected.
Initializing the parameters of a
channel
2
1
3