Filter
Top Products
193
User Level settings
19
User settings (Security)
LS9-16/32 Owner’s Manual
This page includes the following items.
1 CH OPERATION field
Here you can specify (for each channel) the operations
that will be permitted for input channels and output
channels. The settings will apply to the currently
selected channel. Use the panel [SEL] keys to select
the channel for which you want to make settings.
Channels that have the same settings are shown with
the same color in the channel display field. The
selected channel is shown with a frame around it.
● HA
Restricts operation of the HA (Head Amp) patched
to that channel.
● PROCESSING
Restricts operation of all signal processing param-
eters for that channel (except for fader and [ON]
key).
● FADER / ON
Restricts operation of that channel’s fader and
[ON] key.
● SET BY SEL
If this button is on, you can use the [SEL] keys of
the panel to turn all settings of the corresponding
channel on or off.
B CURRENT SCENE field
This specifies the operations that can be performed on
the current scene memory.
● INPUT PATCH / NAME
Restricts operations for input channel patching and
names.
● OUTPUT PATCH / NAME
Restricts operations for output channel patching
and names.
● BUS SETUP
Restricts operations for bus setup.
● RACK 1–8
Restricts operations for the racks (1–8).
● MUTE GROUP ASSIGN / MASTER
Restricts operations for mute group assignment
and mute group master.
C SCENE LIST field
This specifies the operations that can be performed on
scene memories.
● STORE / SORT operations
● RECALL operations
D LIBRARY LIST field
This specifies the operations that can be performed on
libraries.
● STORE / CLEAR operations
● RECALL operations
E FILE LOAD field
This specifies the types of file that can be loaded from
USB memory.
● USER SETUP (user-defined keys and pref-
erence settings)
● SYSTEM SETUP / MONITOR SETUP
● CURRENT SCENE
● SCENE LIST
● LIBRARY LIST
F MONITOR field
This specifies the monitor setup operations that can be
performed.
● OSCILLATOR
● TALKBACK
G SYSTEM SETUP field
This specifies the system setup operations that can be
performed.
● MIXER SETUP
● OUTPUT SETUP
● MIDI
H SET ALL/CLEAR ALL buttons
These buttons set or clear all items in the window.
3
Specify the user level by turning-on the but-
ton for each item that will be permitted.
4
When you’ve finished making settings,
move the cursor to the CLOSE button and
press the [ENTER] key to close the popup
window.
1 2
54 73 6
8
•For the channel parameters included in PROCESSING,
refer to the appendix (
→
p. 256).
HINT