Filter
Top Products
170
About the internal effects
LS9-16/32 Owner’s Manual
This section explains how to change the effect type and
edit the parameters.
1
As described in “Mounting a GEQ or effect
in the virtual rack” (→ p. 158) steps 1–3,
mount an effect in a rack.
A rack in which an effect is mounted will indicate the
effect type used by that effect, and the bypass on/off
status.
1 Effect title/type
B Bypass on/off status
2
Move the cursor to the rack in which the
effect you want to edit is mounted, and
press the [ENTER] key.
The RACK screen will appear, allowing you to edit the
parameters of the effect.
You can also access the RACK 5–8 screens by repeat-
edly pressing the [RACK 5-8] key.
1 Effect type field
This shows the effect title, the name of the type that is
used, and a graphic. The number of input/output chan-
nels (1 IN/2 OUT or 2 IN/2 OUT) of this effect is also
shown. If you move the cursor to the effect type
graphic and press the [ENTER] key, the EFFECT
TYPE popup window will appear, allowing you to
select the effect type.
B BYPASS button
This button temporarily bypasses the effect.
C EFFECT CUE button
This button cue-monitors the output of the currently
displayed effect. This cue function is valid only while
this screen is displayed. The cue will be cancelled
automatically when you switch to a different screen.
D Special parameter field
This shows special parameters that are specific to
some effect types.
E Input/output meters
These indicate the level of the signals before and after
the effect.
F INPUT L/R buttons
These buttons display the OUTPUT CH SELECT
popup window.
G OUTPUT L/R buttons
These buttons display the INPUT CH SELECT popup
window.
H Effect parameter field
This area shows parameters for the currently selected
effect type.
3
If you want to change the effect type, pro-
ceed as follows.
1 Move the cursor to the effect type graphic,
and press the [ENTER] key.
The EFFECT TYPE popup window will appear.
Editing the internal effect parame-
ters
1 2
• The EXTERNAL HA screen that appears when you operate
the [RACK 5-8] key is used when you’re using an external
head amp (
→
p. 175).
HINT
5 7
8
1 462
3
CLOSE button