Filter
Top Products
Functions that can be assigned to user-defined keys
258
LS9-16/32 Owner’s Manual
PAGE CHANGE
PAGE BOOKMARK —
When storing a page:
Flash
When showing a
memorized page:
Blink
When not showing a
memorized page: Lit
Not memorized:
Dark
Memorize the currently selected screen (hold down the
key for two seconds or longer), or display the last-memo-
rized screen (press and release the key within two sec-
onds). Popup windows can also be memorized. In the case
of a rack, the number of that rack is also memorized.
CLOSE POPUP — Flash Close the displayed popup window
CH SELECT INC, DEC — Flash Increment/Decrement the channel selection
SET BY SEL
SET [+48V] —
While pressing: Lit
Hold down this key and press SEL to switch it on/off. Dur-
ing this time, the [SEL] LED will be lit if on or dark if off.
SET [Ø] —
SET [PRE SEND] —
SET [TO STEREO] —
SET [TO MONO] —
SET [TO LCR] —
SET [INSERT ON] —
SET [DIRECT OUT] —
SET DEFAULT
VALUE
—— While pressing: Lit
Hold down this key and press the SELECTED CH encoder
to return to the default value. You can also return to the
default value by moving the cursor to the knob or fader in
the LCD screen, then holding down this key and pressing
the [ENTER] key.
SET NOMINAL
LEVEL
—— While pressing: Lit
While holding down this key, press a [SEL] key to set the
fader of that channel to nominal level. You can also push a
SELECTED SEND encoder to set the send level to nominal
level. You can also return to nominal level by moving the
cursor to the knob or fader in the LCD screen, then hold-
ing down this key and pressing the [ENTER] key.
SENDS ON FADER
MIX1–16, MATRIX1–
8
—
Blinks in SENDS ON
FADER mode
Recall the Sends On Fader function to the selected MIX or
MATRIX
GEQ FADER ASSIGN — ON: lit, OFF: dark Turn the GEQ Fader Assign function on/off.
RECORDER
TRANSPORT
PLAY/PAUSE, STOP, FF/
Next, REW/Previous,
REC
Same as the indica-
tion for the corre-
sponding LCD
button
Recorder transport functions
AUTOREC While pressing: Lit
Shortcut function for STOP → REC → PLAY.
Recording will be initiated in a single action. If this is exe-
cuted during recording, the file being recorded will first be
closed, and then recording will continue with a new file.
DIRECT PLAY
Song title or file name
of audio files
While pressing: Lit
Start playback of a specified audio file from the begining
only once.
The audio file to be played must be saved in the SONGS
folder within the YPE folder. Please note that you won’t be
able to specify a file that is in the root directory or another
folder. When you execute playback, the path in the TITLE
LIST screen will change to \YPE\SONGS\.
HELP — — ON: lit, OFF: dark Switch the Help function on/off
Function PARAMETER 1 PARAMETER 2 LED Explanation