Filter
Top Products
67
6
Output channel operations
LS9-16/32 Owner’s Manual
Chapter 6
Output channel operations
This chapter explains operations for output channels (MIX channels, MATRIX
channels, STEREO channels, MONO channels).
The output channel section takes the signals sent from the input channels to the various buses,
processes them with EQ and dynamics, and sends them to output ports or other buses. The fol-
lowing types of output channel are provided.
■ MIX channels 1–16• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
These channels process the signals sent from input channels to MIX buses, and output them to the corresponding
output port, MATRIX bus, STEREO bus, or MONO (C) bus. When the LS9 is in the initial state, these are assigned
to the OMNI OUT jacks or the output channels of the slot(s).
Signal flow for output channels
12
... ...
15 16
ST
LR
MATRIX CUE
ON
ON
ON
PAN
ON
MIX
M
O
N
O
(C)
12 78 LR
MIX 1-16
To RACKIN PATCH
To OUTPUT PATCH
INSERT OUT 1-16
MIX
INSERT IN 1-16
MIX
INSERT POINT
PRE FADER
PRE EQ
INSERT OUT
INSERT OUT
PRE EQ
METER
INSERT
PRE EQ
INSERT OUT
PRE EQ POST EQ
EQ OUT
METER
DYNA OUT
METER
PRE FADER
METER
INSERT
PRE FADER
INSERT OUT
LEVEL
PRE FADER
Keyin
Self PRE EQ/Self POST EQ/MIX13-16 OUT/
MIX(1-8,9-16) POST EQ
LEVEL
LEVEL
LEVEL
CUE ON
MATRIX1,3...7
MATRIX2,4...8
(PRE FADER)PFL / (POST ON)AFL
PRE FADER / POST ON
PRE FADER / POST ON
To MATRIX
VARI
To MATRIX
VARI
STEREO
ST L
POST ON
METER
POST ON
MIX OUT1-16
(13-16)To KEYIN
To RACKIN PATCH
To OUTPUT PATCH
To MONITOR SELECT
To RECORDER IN PATCH
MONO(C)
ST R
PAN MODE
TO ST TO MONO
TO LCR
PAN
LR MONO
LCR
POST ON
CSR
GR METER
ATT
4BAND
EQ
COMP
COMPAND
EXPAND