Filter
Top Products
61
Sending the signal from an input channel to the STEREO/MONO bus
5
Input channel operations
LS9-16/32 Owner’s Manual
If a ST IN channel is selected, operating the TO ST
BALANCE knob will change the signal levels sent
from the ST IN L/R channels to the STEREO (L/R)
bus and MONO (C) bus as shown in the following
illustration. In this case, the [PAN] encoder will oper-
ate as a conventional BALANCE knob, and no signal
is sent to the MONO (C) bus.
If the CSR knob is set to 100%, operating the TO ST
PAN knob will change the signal levels sent to the
STEREO (L/R) bus and MONO (C) bus as shown in
the following illustration.
If a ST IN channel is selected, operating the TO ST
BALANCE knob will change the signal levels sent
from the ST IN L/R channels to the STEREO (L/R)
bus and MONO (C) bus as shown in the following
illustration.
15
If you want to operate a channel that is not
currently shown in the popup window, use
the [SEL] key to select that channel, and
then make settings for it.
For example if INPUT channels 1–8 are shown in the
popup window, pressing the INPUT channel 9 [SEL]
key will change the popup window to INPUT channels
9–16.
16
When you’ve finished making settings,
move the cursor to the CLOSE button (or
the × symbol in the upper right of the win-
dow) and press the [ENTER] key.
CLR
TO ST PAN knob
Signal sent to the
STEREO (L) bus
Signal sent to the
STEREO (R) bus
Signal level
CLR
TO ST BALANCE knob
Signal sent from the
ST IN (L) channel to
the STEREO (L) bus
CLR
TO ST BALANCE knob
Signal sent from the
ST IN (R) channel to
the STEREO (R) bus
Signal levelSignal level
CLR
PAN knob
Signal sent to the
MONO (C) bus
Signal sent to the
STEREO (L) bus
Signal sent to the
STEREO (R) bus
Signal level
CLR
TO ST BALANCE knob
Signal sent from the
ST IN (L) channel to
the STEREO (L) bus
Signal sent from the
ST IN (L) channel to
the MONO (C) bus
CLR
TO ST BALANCE knob
Signal sent from the
ST IN (R) channel to
the STEREO (R) bus
Signal sent from the
ST IN (R) channel to
the MONO (C) bus
Signal levelSignal level