Filter
Top Products
You can delete a specific sample or all samples from the main memory. This is useful for example to
remove all preprogrammed samples or to remove unwanted samples in order to free up memory.
Also when all samples are erased, the preprogrammed samples of the ST-224 can be
restored by initializing the unit.
While the [PLAY/STOP] key is held down, the display shows the
currently selected sample number. Use the [-] [+] keys to change the
sample number.
When a selected sample is being erased, the indication "ErS-XX" (XX
is the sample number) is shown on the display. When all samples are
being erased, the indication "ErS-AL" is shown on the display.
After erasing is completed, the unit reverts to the normal play mode.
To cancel the erase process, press the [EXIT] key instead of the
[ERASE] key.
Take care that you do not erase a sample you wish to keep. If a
sample has not been transferred to the internal backup memory or
an external data card, an erased sample cannot be restored.
• Also when a specific sample is erased, the numbers of the other
samples do not change.
• Also when all samples are erased, the preprogrammed samples
of the ST-224 can be restored by initializing the unit.
HINTHINT
NOTE
NOTE
SONG
PAD
FUNCTION
PAD ASSIGN
CAPACITY
ERASE OPTIMIZE
PLAY/STOP
RECORD
RE-SAMPLE
GRADE
MONO
STEREO
SAMPLING
EDIT 2
VOLUME/BASS
EXCITER
TREMOLO
AUTO PAN
LO-FI EFFECT
EXTREME EQ
COMPRESSOR
RESONANCE
HIGH-PASS
LOW- PASS
DISTORTION
RING MODULATOR
PITCH SHIFTER
DIMENSION
CHORUS
PHASER
FLANGER
STEP CRY
DELAY
REVERB
TIME STRETCH
SCRATCH
EFFECT
ON/OFF
PAD ENABLE
A
B
EFFECT SYNC
EDIT 1
5
E
START POINT
COPY DELETE
BACKUP
EXIT
SPECIAL
LOAD SAVE
INTERNAL/DATA CARD
+
–
AUTO SYNC
PLAYLIST
TAP
BPM
SONG
PLAY/STOPREC
BPM/
VALUE
MEASURE
SAMPLE/SONGBEAT
+
PLAY/STOP
[–] [+] keys
+–
SPECIAL
+
ERASE
ERASE
or
ERASE
To erase a specific sample, hold down the [PLAY/STOP] key and use the [-] [+] keys to
select the sample number.
1
STEP
To erase the selected sample only, press the [ERASE] key. To erase all samples, hold
down the [SPECIAL] key and press the [ERASE] key.
2
STEP
Press the [ERASE] key again to carry out the erase process.
3
STEP
Erasing a Sample
36
Pad Play Mode Operation
BPM/
VALUE
MEASURE
SAMPLE/SONGBEAT
BPM/
VALUE
MEASURE
SAMPLE/SONGBEAT
BPM/
VALUE
MEASURE
SAMPLE/SONGBEAT