Filter
Top Products
73
MIDI Implementation
MIDI Implementation
1. TRANSMITTED DATA
NONE.
2.RECOGNIZED DATA
1) CHANNEL VOICE MESSAGES
STATUS SECOND THIRD DESCRIPTION
1000 nnnn 0kkk kkkk 0vvv vvvv NOTE OFF
kkk kkkk : Note number ( See NOTE 1 ).
vvv vvvv : Note Off Velocity ( ignored ).
1001 nnnn 0kkk kkkk 0000 0000 NOTE OFF
kkk kkkk : Note number ( See NOTE 1 ).
1001 nnnn 0kkk kkkk 0vvv vvvv NOTE ON
kkk kkkk : Note number ( See NOTE 1 ).
vvv vvvv : Note On Velocity ( not 0 ).
1010 nnnn 0kkk kkkk 0vvv vvvv POLYPHONIC KEY PRESSURE
kkk kkkk : Note number ( See NOTE 2 ).
vvv vvvv : Pressure value ( See NOTE 2 ).
1011 nnnn 0ccc cccc 0vvv vvvv CONTROL CHANGE
ccc cccc : Control number ( See NOTE 3 ).
vvv vvvv : Control value.
1100 nnnn 0ppp pppp ---- ---- PROGRAM CHANGE
ppp pppp : Program cahnge number( See NOTE 4 ).
NOTE : nnnn = MIDI Channel Number ( 0000 - 1111 )
1 : Recognized Note numbers are 35-59 at Basic channel on normal mode,
or 95-119 at channel 10 at extention mode.
2 : Note #12(bank1/pad1)-#35(bank3/pad8) control to change "REVERSE of pad_function(PAD)".
Note #36(bank1/pad1)-#59(bank3/pad8) control to change "EFFECT PAD ENABLE(PAD)".
Note #108(source pad) control to change "EFFECT PAD ENABLE(SOURCE)".
Pressure value(0) is turning off,pressure value(not 0) is turning on.
Note #60(bank1/pad1)-#83(bank3/pad8) control to change "LEVEL of pad_function(PAD)".
Note #84(bank1-pad1)-#107(bank3/pad8) control to change "PANNING of pad_function(PAD)".
Note #109(source pad) control to change "LEVEL of pad_function(SOURCE)".
Pressure value(0 to 99) is value of the control.
If pressure value is greater than 99, internal pressure value is limited to 99.
Note #110(source pad) control to change "PANNING of pad_function(SOURCE)".
Pressure value(0 to 100) is value of the control.
If pressure value is greater than 100, internal pressure value is limited to 100.
3 : Control #12 can be used to Effect Parameter 1(control value 0..100).
Control #13 can be used to Effect Parameter 2(control value 0..100).
If control value is greater than 100, internal control value is Limited to 100.
Control #14 can be used to Effect BPM 40bpm(control value 0)..167bpm(control value 127).
Control #15 can be used to Effect BPM 168bpm(control value 0)..250bpm(control valeu 82).
Control #80 can be used to EFFECT OFF(control value 0)/ON(control value 127).
Control #81 can be used to EFFECT SYNC OFF(control value 0) / ON(control value 127).