Filter
Top Products
47
Using the Internal Effects
EDIT 1 EDIT 2 SYNC
DISTORTION A gain tone –
RING
MODULATOR
B
balance
–
LOW-PASS A LFO
HIGH-PASS
B
frequency
frequency
frequency
LFO
EXTREME EQ A gain –
RESONANCE B
resonance
sens LFO
LO-FI A noise tone –
COMPRESSOR B
B
B
ratio
threshold
–
TREMOLO A
A
rate &
clip
rate
depth
AUTO PAN rate width rate
VOLUME/BASS
volume
bass
boost
–
EXCITER sens
frequency
–
resonance
resonance
filter type
EFFECT TYPE BANK Description
This effect produces a wild-sounding distortion. The [EDIT 1] wheel
adjusts the distortion gain (gain), and the [EDIT 2] knob the tone. The
distortion is a mono effect.
This effect uses AM (amplitude modulation) to achieve a metallic
sound. The [EDIT 1] wheel adjusts the modulation frequency
(frequency), and the [EDIT 2] knob the level ratio between original
sound and effect sound (balance).
This is a low-pass filter that cuts off high frequencies. The [EDIT 1]
wheel adjusts the filter cutoff frequency (frequency), and the [EDIT 2]
knob the resonance (resonance). When the [EFFECT SYNC] key is set
to ON, the periodic alteration of the filter cutoff frequency (LFO) is
synchronized to the effect BPM.
This is a high-pass filter that cuts off low frequencies. The [EDIT 1]
wheel adjusts the filter cutoff frequency (frequency), and the [EDIT 2]
knob the resonance (resonance). When the [EFFECT SYNC] key is set
to ON, the periodic alteration of the filter cutoff frequency (LFO) is
synchronized to the effect BPM.
When the [EDIT 1] wheel is turned forward, the selected frequency band
is attenuated. When the wheel is turned back, the frequency range
outside the selected band is attenuated. The [EDIT 2] knob selects the
LOW, MID, or HIGH range.
This is a filter whose effectivity varies with the signal level. The [EDIT
1] wheel adjusts the filter sensitivity (sens). When the [EFFECT SYNC]
key is set to ON, the periodic alteration of the filter sensitivity (LFO) is
synchronized to the effect BPM.
This effect makes the sound gritty and rough. The [EDIT 1] wheel
adjusts the record type noise (noise), and the [EDIT 2] knob the sound
quality (tone).
This is a conventional compressor for compressing the dynamic range.
The [EDIT 1] wheel adjusts the compression ratio (ratio), and the [EDIT
2] knob the threshold level (threshold).
This is a tremolo effect which shifts the volume periodically up and
down. The [EDIT 1] wheel adjusts the tremolo speed (rate) and the
modulation waveform clipping amount (clip). The [EDIT 2] knob
adjusts the tremolo effect intensity (depth). When the [EFFECT SYNC]
key is set to ON, the periodic alteration of the tremolo is synchronized to
the effect BPM.
This effect periodically moves the sound back and forth between the
right and left channel. The [EDIT 1] wheel adjusts the auto pan speed
(rate), and the [EDIT 2] knob the stereo width (width). When the
[EFFECT SYNC] key is set to ON, the auto pan cycle is synchronized to
the effect BPM.
Adjusts the volume level and the low-frequency boost. The [EDIT 1]
wheel adjusts the volume (volume : 0 dB at center position, max. +6 dB) ,
and the [EDIT 2] knob the amount of bass boost (bass boost).
This effect emphasizes a specified frequency range according to the
signal level, giving a prominent character to the sound. The [EDIT 1]
wheel adjusts the effect sensitivity (sens), and the [EDIT 2] knob the
emphasized frequency (frequency).