A SERVICE OF

logo

SET DEVICE DIAGNOSTICS
2-109
SET DEVICE
DIAGNOSTICS
Use the SET DEVICE DIAGNOSTICS command to enable or disable diagnostics
during startup (or reboot) of the DMM. Disabling diagnostics saves time during
reboot of the DMM, but does not confirm correct operation.
The factory setting is diagnostics enabled.
Format
Example
The following command causes diagnostics to run during reset of the DMM:
CB5000> set device diagnostics enable
DIAGNOSTICS option ENABLED.
set device diagnostics disable
enable
disable
Disables diagnostics upon reboot.
enable
Enables diagnostics upon reboot.