A SERVICE OF

logo

SET ATM NUM_LECS
2-59
SET ATM NUM_LECS
Use the SET ATM NUM_LECS command to specify the number of LAN
Emulation Clients (LECs) you expect to support on this module. The system uses
the value you select for resource allocation sizing during initialization. The value
you select takes effect after module reset.
Format
Example
The following command sets the num_lecs in slot 4 to 20:
CB5000> set atm 4 num_lecs 20
Slot 04 parameter set.
Warning: Change does not take effect until module is reset.
Related Command
SHOW ATM INTERFACE
slot Identifies the slot for this operation.
slot (1 through 17) is the slot number.
option Choose from a range of 1 through 64.
set atm
num_lecs
slot
option