A SERVICE OF

logo

2-4
CLEAR ATM
CLEAR ATM
Use the CLEAR ATM command to clear the ATM’s if_Name (interface name) for
the ATM-layer interface.
Format
Example
The following command clears the ATM if_name (Test) from the ATM module in
slot 4.
CB5000> clear atm 4 if_name Test
Slot 04 parameter cleared.
Related Commands
SET ATM NEIGHBOR IF_NAME
SHOW ATM INTERFACE
slot Identifies the slot for this operation. slot (1 through 17) is the slot
number.
name Use up to 63 characters for the ifName.
clear atm
slot
if_name
name