A SERVICE OF

logo

2-212
SET RMON EVENT
SET RMON EVENT
Use the SET RMON EVENT command to create events that are triggered by
alarms created using the SET RMON ALARM command.
Format
Example
The following command sets up a trap message sent when the CRC Alignment
Error alarm is triggered:
CB5000> set rmon event trap
Enter one line for event description:
> CRC Alignment Error Threshold Exceeded!!
Entry 2 created.
Related Commands
SHOW RMON
SET RMON ALARM
set rmon event
community
log
log_trap
none
trap
log
Writes an entry in the event log.
log_trap
Writes an entry in the event log and sends a trap to the specified
community.
none
Takes no action.
trap
Sends a trap to the specified community.
community The SNMP community name for trap receivers. The default is public.