A SERVICE OF

logo

2-60
SET ATM NUM_VCCS
SET ATM NUM_VCCS
Use the SET ATM NUM_VCCS command to specify the number of virtual circuits
you expect to support on this module. The system uses the value you select for
resource allocation sizing during initialization.
VCCS is an abbreviation for Virtual Channel Connections.
Format
Example
The following command configures the num_vccs in slot 4 to 128:
CB5000> set atm 4 num_vccs 128
Slot 04 parameter set.
Warning: Change does not take effect until module is reset.
Related Command
SHOW ATM INTERFACE
slot Identifies the slot for this operation.
slot (1 through 17) is the slot number.
option Choose from a range of 128 through 512.
set atm
num_vccs
slot
option