A SERVICE OF

logo

2-66
SET ATM UNI_VERSION
SET ATM
UNI_VERSION
Use the SET ATM UNI_VERSION command to specify the User Network Interface
(UNI) version you want to use. The default setting is
3_1
.
The version you
specify takes effect at the next module reset.
Format
Example
The following command sets the ATM version to 3.0:
CB5000> set atm 4 uni_version 3.0
Slot 04 parameter set.
Warning: Change does not take effect until module is reset.
Related Command
SHOW ATM ILMI CONFIGRATION
slot Identifies the slot for this operation.
slot (1 through 17) is the slot number.
3_0
Specifies UNI Version 3.0.
3_1
Specifies UNI Version 3.1.
set atm
uni_version
slot
3_0
3_1