A SERVICE OF

logo

Open as PDF
next previous
CLEAR BRIDGE_PORT NAME
2-9
CLEAR BRIDGE_PORT
NAME
Use the CLEAR BRIDGE_PORT NAME command to clear a bridge port name.
When you enter this command, you can specify one bridge port name or all
bridge port names.
Format
Example
The following command clears the name finance_1 to port 3 on the
SwitchModule in slot 5:
CB5000> clear bridge_port 5.3 name finance_1
Related Command
SET BRIDGE_PORT NAME
slot.port Identifies the port for this operation.
slot is the slot number (1 through 17) and port is the port number. For
example, to identify port 4 on the module in slot 6, enter
6.4
slot.
all
Clears all bridge port names in a particular slot.
name Specifies the name (up to 32 characters) you want to identify this port.
clear bridge_port name
slot.port
name
slot.
all