A SERVICE OF

logo

Open as PDF
next previous
SET GROUP PORT
2-119
SET GROUP PORT
Use the SET GROUP PORT command to assign ports to a port group. After the
port groups are established, you can use the SET GROUP MODE command to
enable or disable all of the ports in a port group.
Format
Example
The following command assigns port 1 on slot 5 to group1:
CB5000> set group group1 port 5.1
Port 5.1 set to group1
Related Commands
SET GROUP NAME
SET GROUP MODE
SHOW GROUP
group Specifies a group name.
slot.port Identifies the port to be assigned to the group.
slot.port identifies the port.
slot (1 through 17) is the slot ID and port is the port number. For
example, to identify port 4 on the 6, enter
6.4
set group
group
port
slot.port