![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/82/7828d65f-46b8-46da-9f48-509cf8d9bc2c/7828d65f-46b8-46da-9f48-509cf8d9bc2c-bg1e.png)
30 Section 1A: Setting Up Your Palm
®
Treo™ 800W Smart Device
3. To confirm that your Treo is being charged, wait about 30 seconds and then check the
indicator light.
Ⅲ Solid red: Your Treo is being charged and the battery is less than 90% full.
Ⅲ Solid green: Your Treo is charged and the battery is at least 90% full.
If the battery is fully drained, it may take a few minutes for the indicator light to turn on when
you connect your Treo to the AC charger. If the indicator light still does not turn on,
double-check the cable connection and the electrical outlet to which it is connected.
Checking Battery Power
The onscreen battery icon displays the power status:
* Battery Icon
ⅷ Lightning bolt : Battery is being charged.
ⅷ Gray lightning bolt : Battery is connected to a power source and is fully charged.
ⅷ Full battery : Battery is fully charged.
Tip
Although it takes longer to charge, you can also charge your Treo through
your computer by connecting them with the sync cable (see “Synchronizing
With a USB Connection” on page 50). However, if the battery is fully drained,
you must use the AC charger.
*