Filter
Top Products
User’s Guide – version 3.1.3 NetFlow Tracker
32
O
ut Interface
The out interface filter restricts a report to just outbound traffic from a set of
interfaces. Used in combination with an in interface filter it will report on traffic that
took a particular path through a router.
In/Out Interface
The in/out interface filter restricts the report to bi-directional traffic for the selected
interfaces.
In VPN
The in VPN filter restricts a report to just traffic where the inbound interface is part of
the selected VPN(s). Interfaces must be associated with VPNs in Device Settings
for
this filter to function.
Out VPN
The out VPN filter selected traffic where the outbound interface is part of the selected
VPN(s).
VPN
The VPN filter selects traffic where either interface is part of the selected VPN(s).
Source Address
You can restrict the report to traffic with a given source IP address or one of a set of
source IP addresses. Type the address or domain in the box and click “Add”. If you type
a domain name, all addresses resolved for that domain are added to the filter.
Destination Address
The destination address filter will report on data with one of a set of destination IP
addresses.
Source/Destination Address
This filter will consider traffic either originating from or destined for the given
addresses.
Protocol
You can restrict the set of IP protocols considered. For example, you may want to
consider only UDP or ICMP traffic while investigating a denial-of-service attack.
Source Application
The source application filter restricts the IP protocol and source application port
number. You can enter a port number and protocol manually or you can select from
the configured in the IP Application Names
settings page.
Destination Application
This restricts the protocol and destination application port, selectable by name.
Source/Destination Application
This filter considers traffic using the given application as either the source or
destination.