Filter
Top Products
User’s Guide – version 3.1.3 NetFlow Tracker
50
i
nvpn – specifies a VPN that the input interface must be part of.
<name>
The VPN name; see Device Settings for more information
<id>
The VPN identifier
outvpn – specifies a VPN that the output interface must be part of. Format as for
invpn above.
vpn – specifies a VPN that either interface must be part of. Format as for invpn
above.
srcaddr – specifies an acceptable source address.
<addr>
The address in dotted-decimal format
srcaddr_exclude=true – specifies that the supplied source addresses are excluded
rather than included.
dstaddr – specifies an acceptable destination address. Format as for srcaddr above.
dstaddr_exclude=true – specifies that the supplied destination addresses are
excluded rather than included.
addr – specifies an acceptable source or destination address. Format as for srcaddr
above.
addr_exclude=true – specifies that the supplied source or destination addresses are
excluded rather than included.
proto – specifies an acceptable IP protocol.
<name>
The protocol name, such as TCP or UDP
<number>
The protocol number, in the range 0-255
proto_exclude=true – specifies that the supplied protocols are excluded rather than
included.
srcappl – specifies an acceptable source IP application.
<port>/<name>
The application, with port being the application port number
in the range 0-65535 and name being the protocol name,
such as TCP or UDP
<port>/<number>
The application, with port being the application port number
in the range 0-65535 and num being the protocol number in
the range 0-255
<name>
The name of a grouped application
srcappl_exclude=true – specifies that the supplied source applications are excluded
rather than included.