Filter
Top Products
User’s Guide – version 3.1.3 NetFlow Tracker
42
f
ormat – specifies the output format of the report or chart.
html
Fully interactive HTML (default)
print
Printable/saveable HTML
csv
Comma separated values
r
eload – specifies the number of seconds between automatic refreshes of the report.
This is best used in conjunction with one of the dynamic time ranges, below. Only the
interactive HTML format supports this parameter.
-1
The report will not reload automatically (default)
<seconds>
Number of seconds between refreshes
Time Range Parameters
The time range can be specified in one of several ways. If no time range is specified a
default will be used.
Start and end time
An fixed start and end time can be specified in UTC, which is the number of
milliseconds since 1 Jan 1970, or in plain text.
stime – specifies the start of the required time range.
<time>
The time in milliseconds UTC
<dd>/<MM>/<yyyy>%20<HH>:<mm>
The time, with <dd> being the date, <MM>
the month, <yyyy> the year, %20 a URL-
encoded space character, <HH> being the
hour in the 24-hour clock and <mm> being
the minutes
etime – specifies the end of the required time range.
<time>
The time in milliseconds UTC
<dd>/<MM>/<yyyy>%20<HH>:<mm>
The time, with <dd> being the date, <MM>
the month, <yyyy> the year, %20 a URL-
encoded space character, <HH> being the
hour in the 24-hour clock and <mm> being
the minutes
Fixed length
If you would like to create a URL that will always show a current time range, you can
specify a certain number of milliseconds ending at the time the report is generated.
length – specifies the length of the required time range.
<millis>
The length in milliseconds