Fluke Recording Equipment Recording Equipment User Manual


 
User’s Guide – version 3.1.3 NetFlow Tracker
39
0023
Next Hops
0
024
S
ource Address Dissemination
0025
Destination Address Popularity
0026
Recognised Applications
0027
Traffic Classes
0028
Identified Applications
0029
Bi-directional Address Pairs
0030
Bi-directional Conversations
0031
Bi-directional AS Pairs
0032
Bi-directional Network Pairs
0033
Total
0034
VPNs
_flows
Full flows
id – specifies the long-term report to open. It is possible to enable several standard
long-term reports in Report Settings; the IDs for these reports are given below. The id
for a custom report is available in Report Settings
. This parameter should not be used
in conjunction with templid or cid.
0000
Source Addresses per inbound interface
0001
Source Addresses per outbound interface
0002
Destination Addresses per inbound interface
0003
Destination Addresses per outbound interface
0004
Recognised Applications per inbound interface
0005
Recognised Applications per outbound interface
0100
Source Addresses per source device
0101
Destination Addresses per source device
0102
Recognised Applications per source device
<id>
A custom long-term report ID
cid – specifies the executive report to open. The ID for an executive report is available
in Report Settings. This parameter should not be used in conjunction with templid or
id.
<id>
An executive report ID
output – specifies if a tabular report or chart will be generated.
table
A tabular report will be generated (default)
chart
A chart over time will be generated
pie
A pie chart will be generated