Filter
Top Products
80
Saving and Loading Song Data
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
DIGITAL
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
REMAIN
SMH
DIGITAL
7. Press the EXECUTE/YES key again.
[Play DAT !] appears on the display.
8. Start playing the DAT machine.
When the saved pilot signal is played, the load operation
starts automatically. The duration for the load operation
appears as a negative value and increments as the opera
tion progresses. The tracks being loaded also appear on
the display.
During the load operation, the LEDs of the RECORD TRK
select keys 1/L and 2/R flash, and the level meters for
tracks 1 and 2, and L and R reflect the levels.
This area indicates a negative value of
the total duration required to load data,
which counts up as the load operation
progresses.
This area indicates the tracks of
currently-loaded data. In this ex-
ample, tracks 1 and 2 are being
loaded. This will change to 3 and 4,
then 5 and 6.
You can monitor the data using the following methods:
• Using the monitor selector [MON]
• Turning the MON knobs for channels 1 and 2 toward [TRK 1] and
[TRK 2] respectively
• Turning the MASTER knob in the monitor section
When the save operation is complete, [COMPLETED !] lights
up on the display, and FD-4 stops. Stop playing the DAT
machine.
9. Press the STOP button or the EXIT/NO key.
[COMPLETED !] disappears, the Program for the data you
loaded is selected, and the ABS Time Base appears.
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
SURE ?
DIGITAL