Peavey V12 Music Mixer User Manual


 
p. 14
aux features
aux send section 9/10, 11/12, 13/14, 15/16
Four sets of dual concentric controls, each set having the following associ-
ated controls:
note:
Aux send 9 thru 16 are always fed as stereo:
left source feeds auxes 9, 11, 13, 15
right source feed auxes 10, 12, 14, 16 this remains true for pre or
post signals.
pre-fader switch
Selects the stereo source of the signal for the dual concentric control
between the normal post fader signal source position to a pre fader signal
source position.
push-on /push-off switch
Inner control of dual concentric pot acts as an On/Off switch for the
auxiliary send pair of signals (odd and even)
dual-color on-indicator
Each dual concentric control has a dual color LED to indicate on/off/mute
status. When the aux pair is off, the LED is not illuminated. When the aux
pair is ON, the LED will illuminated GREEN. When the aux pair is ON
but MUTED, the LED will illuminated RED.
invisible mono/stereo switch 9/10, 11/12, 13/14, 15/16
FET switching controlled from within the master section determines if the
dual concentric pair is set up as Level/Level (default) or Level/Pan.When
set for Lev/Pan, the inner knob controls Level, the outer knob pans
between odd & even pairs.
INTERNAL JUMPER - selects pre fader stereo signals as pre or post EQ.
Internal dip switch sets Mute/NoMute functions for all 8 (four-pairs) aux sends
within this block. Default setting is post EQ,follow Mute.
stereo input module