Peavey V12 Music Mixer User Manual


 
module swap features
mode switch (recessed)
Controls the assignment of output functions between the three output
blocks. This switch toggles between FOH (Front of House) and MONI-
TOR (AUX) operation of the lower fader area. When Monitor (Aux) is
selected, the middle control section of the module takes over Group
Operation.
MTX switch (recessed)
The operation of this switch is determined by the above MODE switch.
When in FOH Mode, and this MTX switch is NOT depressed, this module
is operating in default mode. Group output is controlled by the lower block
with the Status LED indicating FOH SUB GRP. The Mid section LED status
indicator indicates and operates as AUX MASTER, and the Upper block sec-
tion LED status indicator indicates and operates as MATRIX MASTER.
When in FOH Mode, and this MTX switch IS depressed, this lower block
and all of its functions will operate as the Matrix Control Section with the
LED status indicator showing FOH MATRIX OUT. The Mid section LED
status indicator still indicates and operates as AUX MASTER, and the Upper
block section LED status indicator now indicates and operates as a GROUP
MASTER.
When in STAGE MONITOR MODE, this lower block and all of its func-
tions will operate as the MONITOR (AUX) Control Section with the LED
status indicator showing MONITOR OUT. The Mid section LED status indi-
cator indicates and operates as GROUP MASTER, and the Upper block sec-
tion LED status indicator indicates and operates as a AUX MASTER.
When in STAGE MONITOR MODE and the MTX switch is depressed, a
post matrix level signal is fed to the MONITOR (AUX) mix bus. An inter-
nal jumper allows the matrix to be sourced pre fader if desired. This allows
generic mixes such as drums to be able to be mixed with the primary mon-
itor outputs. When in this mode, only the MTX switch itself will illuminate,
while the primary STAGE MONITOR MODE LED will remain illuminated.
FOH group LED
Indicated that the lower fader block is controlling the ANALOG SUB
GROUP output of this module.
FOH matrix LED
Indicated that the lower fader block is controlling the MATRIX output of
this module.
STAGE MONITOR LED
Indicated that the lower fader block is controlling the MONITOR (AUX)
output of this module.
write-on strip
Will provide a number for this group output as well as providing a write
in area for the customer or a mounting surface for the customers mask-
ing tape labeling.
p. 27
group output module—matrix, aux, group